How Do I configure asterisk with sipgate?
These are the settings for the basic configuration of asterisk for sipgate.
For general asterisk configuration instructions with sipgate SIP Trunking accounts please click here instead.
Note: Please replace "your SIPID with SIP-ID and "PASSWD" with SIP-Password respectively.
Please enter the following in sip.conf:
- register => SIP-ID:SIP-Pass"word@sipgate.co.uk/SIP-ID
- [sipgate]
- type=peer
- secret=PASSWORD
- insecure=invite
- username=SIP-ID
- defaultuser=SIP-ID
- fromuser=SIP-ID
- context=sipgate_in
- fromdomain=sipgate.co.uk
- host=sipgate.co.uk
- outboundproxy=sipgate.co.uk
- qualify=yes
- disallow=all
- allow=alaw
- dtmfmode=rfc2833
Please enter the following in extensions.conf:
- [sipgate_in]
- exten => SIP-ID,1,Dial(SIP/Extension) <-- instead of extension you should define the corresponding peer
- exten => SIP-ID,n,Hangup
- [sipgate_out]
- exten => _X.,1,Set(CALLERID(num)=SIP-ID)
- exten => _X.,2,Dial(SIP/${EXTEN}@sipgate,30,trg)
- exten => _X.,3,Hangup