sipgate team & trunking Help

How Do I Configure Asterisk with sipgate team?

These are the settings for the basic configuration of asterisk for sipgate with sipgate team

For general Asterisk configuration instructions with sipgate SIP Trunking accounts please click here instead.

Note: Please replace your SIPID with SIP-ID and PASSWD with SIP-Password respectively.

Please enter the following in sip.conf:

  • register => SIP-ID:SIP-Password@sipgate.co.uk/SIP-ID
  • [sipgate]
  • type=peer
  • secret=PASSWORD
  • insecure=invite
  • username=SIP-ID
  • defaultuser=SIP-ID
  • fromuser=SIP-ID
  • context=sipgate_in
  • fromdomain=sipgate.co.uk
  • host=sipgate.co.uk
  • outboundproxy=sipgate.co.uk
  • qualify=yes
  • disallow=all
  • allow=alaw          
  • dtmfmode=rfc2833

Please enter the following in extensions.conf:

  • [sipgate_in]
  • exten => SIP-ID,1,Dial(SIP/Extension) <-- instead of extension you should define the corresponding peer
  • exten => SIP-ID,n,Hangup
  • [sipgate_out]
  • exten => _X.,1,Set(CALLERID(num)=SIP-ID)
  • exten => _X.,2,Dial(SIP/${EXTEN}@sipgate,30,trg)
  • exten => _X.,3,Hangup
Have more questions? Submit a request