Cisco SPA - Deskphones

The following guide will help configure Cisco SPA phones and devices with your sipgate account.

To configure your Cisco device you'll need your SIPID and SIP Password.

Follow the instructions in your Cisco SPA's manual to open the Cisco SPA web configuration menu.

Click Admin Login and then select Advanced View. Otherwise all settings will not be displayed.

Open Voice --> EXT or Line to enter your sipgate account details as shown below:

Click Submit All Changes and then open the SIP tab:

Under the Network tab set the NTP Time Server to: ntp.sipgate.net

Testing your Phone's setup:

To test your phone's configuration, please dial the following sipgate numbers:

• 10000
• 10005
• 10020

 If you have problems registering your Cisco SPA online, or with making calls, test with the STUN Server enabled under SIP --> NAT Support Parameters.

STUN Server: stun.sipgate.net

Using Multiple Phones Behind the Same Router:

If there's more than one VoIP phone/device on the same local network, assigning each different local UDP ports will avoid port conflicts.

For each SIP Phone or device you add, increment the local ports used by 100.

Note: